Almost all people of the modern age are familiar with the peepholes – the small holes in the door which are fitted with lenses to show who is outside. But as the world is progressing the area of home security is also developing. The Peephole Camera is the next big thing in home security. So, today we will learn how to install a peephole camera. This article will provide you a complete step by step guideline into making your homes much safer.
Before that you can check out the top peephole camera that you can install.
How To Install A Peephole Camera– Step By Step Guide
Step 1: Charging The Battery
The life and performance of any electrical or electronic device depends on its battery. Same is the case with the peephole camera. Before you start install a peephole camera, it is essential to check on its power status. If it is charged then you can go ahead and install it. But, if it is not fully charged as is the case mostly, you need to charge the camera first before installing it.
In order to charge the battery of your peephole camera, you need to locate the adapter and a tightening nut which usually comes along the camera. Now, you need to plug the battery into a USB port with the help of the cable given with the camera. Switch on the plug after securing the connection to charge the battery.
You may notice that there is a led light to indicate while the battery is getting charged. The light goes off automatically to show that either the battery is full or it is not charging properly due to some reason. The indicating pattern may vary from brand to brand but the overall concept is the same.
Step 2: Removing The Paint
Now that the battery is fully charged, it is time to move to the second step of the procedure. In this step you need to clean the path for your peephole camera by removing the paint from the peephole. Make sure that the peephole is cleaned from both inside and outside.You may have to remove excess paint to unscrew your peephole.
See that there should not be an extra amount of paint around the peephole area. If there is, it needs to be removed properly before you install a peephole camera. You can use any sharp object to accomplish this task. For example: take a peephole key. It has teeth on the edges which can prove to be very useful in removing extra paint. You need to be careful while removing the paint and pay extra attention to the corners.
Step 3: Removing Inside Half Of The Peephole
Now that the paint is removed from the area you need to remove the peephole from inside the door. As you know that peepholes are installed half and half from inside as well as from outside. So, our job in this step is to remove the inside half of the peephole.
Take your peephole key. Put it in the slot given on your peephole. Make sure it fits perfectly. Also, make sure that you put the flat side of the peephole key into the slot. Rotate the key gently in an anticlockwise direction. This will lead to unscrewing of the peephole. Continue the rotation till the peephole is loosened. Now that the peephole screw is loose enough be careful and remove it completely.
Keep in mind that while you unscrew the inside half of the peephole you should keep a hold on the outside half of the peephole to stop it from getting loose or coming off. Although, you will need to remove the outside half of the peephole as well but if you do not securely hold it for the while it might end up falling down or getting damaged.
Step 4: Removing Outside Half Of The Peephole
Once the inside half of the peephole is removed you can remove the outside half very easily. Usually it automatically comes out after removing its half part but if you feel that it is stuck somewhere or is not easily sliding off, you should closely examine the area. There might be extra paint or something else stuck in its path.
Remove the obstruction and keep the lens safe for future use.
Step 5: Install A Peephole Camera From The Outer Side
So, now it is time to start the installation of the peephole camera. Take the tube of the camera and insert it through the door from the peephole. Put the tube through the peephole to the extent that the peephole camera is at level with the door. Once you have inserted the camera all the way through the door, it is time to remove the tape from the end of the tube.
You need to pay attention to a salient feature of your peephole camera. Generally the company puts a protective sticker made of thin plastic over the button of the doorbell. This sticker is to prevent damaging of the item during shipping. You must remove this sticker for your camera to work properly.This sticker proves to be a hindrance in capturing knocks, sounds of movement etc. So, in order to enable these features you must take off the sticker.
Step 6: Adapter Needs
There is generally an adapter along with the peephole cameras. It is provided to fit the camera into a large peephole. You should make sure that whether you need the adapter or not. If you are not sure or aware about the size of the peephole of your door, you can follow the steps given below to check if your peephole is big enough to need an adaptor or not.
- Take the adaptor out and put it on the tube and cable.
- Now try to push it in the peephole from the inner side of the door.
- If it goes in easily, your Peephole is large enough and you will need the adapter.
- So, insert the adaptor fully till its rim is parallel to your door.
- If it does not go in easily, or seem to be stuck somewhere, do not force it. This means your Peephole is small and you will not need the adaptor anyway.
You must keep in mind that as you have just adjusted the outer half of the peephole camera, you should not let it fall down while working on the adaptor from the inner side of the door. So,secure the outer side arrangement with the help of someone.
Step 7: Removing The Back Cover
Now that you have successfully completed the above mentioned steps, it is now time to move forward. In this step you need to remove the cover from the back of the camera. Properly pull the cover from its edge till it comes out. Now, keep the cover aside and move on to the next step.
Step 8: Install A Peephole Camera From The Inner Side
Now, it is time to assemble the rest of the camera. As you have already adjusted the outer half of the camera, you now need to finish the job by putting the inner side portion of the camera in place.
So, take the remaining part of the peephole camera and gently slide it in the tube. Just make sure not to put too much pressure. If too much pressure is applied then the other half portion installed from the outside might get pushed out.
Step 9: Removing The Connector Cable
It is now time to remove the connector cable. Get hold of each side of the exposed tab. Very gently pull it out of the tube. Keep in mind that you need to be careful while removing the cable in order to avoid damage.
Step 10: Joining The Indoor And Outdoor Parts
You have successfully installed the indoor and outdoor parts of the peephole camera on the door. Now all you need to do is to connect both the parts to each other. You have also removed the cable, so let us move forward.
Take a nut and put it into the peephole through the tube. The purpose of this nut is to tighten the camera. Now take the peephole key and rotate the nut in clockwise direction until the camera is completely fixed. You can also use your finger to do so. Now that the camera is firm and fixed at its spot, check the outdoor portion to make sure that it is in the right position at right angle and quite steady.
Now that both the parts are correctly affixed to the door and are firm at their spots, you should plug the connector. Very carefully, pull the cable, and push the connector inside the port on the indoor.
Step 11: Securing The Cable
Now it is time to finish the job. You need to secure the cable of your peephole camera. Slide the cable down the channel. You can follow the arrow for directions. Now that the cable is secure you can insert the battery which you have charged fully in the very first step. Insert the battery in its slot which is at the bottom of your peephole camera.
It will not be possible for you to see if you are inserting the battery at the right place or not. Therefore, it is designed in a way that if the battery is inserted properly it will make a clicking sound and you will be able to understand that you have done your job right.
Step 12: Programming
Every peephole camera is designed to be compatible with smart devices. So, once you install a peephole camera, you need to download the respective application and connect your devices like phones or laptops to the camera for completing the setup.
Final Thought
The peephole camera is the next step in improving and ensuring the safety of your home and family. It is a necessity in today’s times and so everyone should know about its features as well as its importance. We hope that after reading this article you will be able to install a peephole camera.
Leave a Reply